Tyler and I have started 2019 off the same way we left 2018; hitting up call after call and having a blast while we do it. January has included quite a few starts to some renovation projects and the beginnings to what looks like a busy spring with clients asking us to quote them on their new builds. Working with clients on a new build can be very rewarding because A) there is nothing better than roughing in a house in the Summer, and B) you get the opportunity to help build what is potentially the client’s dream home and know you’re working on a project that will last a long time. 10 years from now when I’m teaching Smith to drive I’ll sit in the passenger seat and annoyingly point out every house in the neighbourhood I’ve built like every other trades-dad does.
As usual furnaces and boilers are shutting down when you would least like them to. Furnace repairs in Regina love to take place on weekends and holidays for some strange reason, but fortunately it has not been an overly cold winter until recently, this has helped a lot of older equipment limp through one more cold season. For a lot of homeowners, remember to replace your furnace filter (obviously you have already read our last post though), get a furnace maintenance completed and you may be able to make it to spring in one piece.
We also have entered the Regina Spring Home Show and have been getting prepared for a busy weekend, meeting everyone excited about their home renovations and also seeing all the other exhibitors that are set up. I attended last year and couldn’t believe the amount of booths that were a part of the show. Whatever renovation you might be planning, this is definitely the event you want to attend. The sheer deck building prowess in the room is palpable.
As always please follow along with us on Facebook @ Family Plumbing and Heating and Instagram @family_plumbing and feel free to call us anytime 306-519-3722
A common question I get asked by clients is what kind of fixture they should buy for their upcoming renovation. Walking into Home Depot or Rona you can become overwhelmed with aisles full of faucets, shower trim, and toilets. It’s hard to tell where the quality fixtures are hiding and which ones are just shiny pieces of stainless steel. Here are some quick guidelines to help you make the best purchase possible.
1) Stick with the big names: Moen and Delta are the general go to’s. They have been around forever and aren’t going anywhere soon. This means that if a repair is needed the technicians have likely seen this problem before, have experience fixing it and replacement parts will be readily available. Large department stores don’t often carry the parts for their in-store brands. You may save money up front but will pay extra once it breaks down.
2) Cheaply priced, cheaply made: If you pay next to nothing for a kitchen faucet (less than $100), it would be considered a cheap faucet. It is likely made with a lot of plastic which degrades quickly especially depending on the hardness of your water. Sometimes it will be hard to stomach the price tag on some faucets but trust me, you’ll end up replacing the cheap faucet well before you replace a more expensive counterpart.
3) What about high end?: There are some very nice faucets and fixtures out there if you have the money. Two notes to remember for this category are the more expensive the fixture, usually the cost of install will rise as well. And as I’ve mentioned before, fewer clients go for the high end fixtures which means technicians have had less experience installing them which can lead to mistakes on the install.
4) Stick to the middle of the road: This will give you the most reward for your money. Not too expensive and not too cheap. These fixtures and faucets will check off all the boxes. Look nice, repair parts available, and technicians have experiencing repairing.
5) What type of toilet should I buy?: This is another common question. Now while there are some pretty cool fancy toilets out there, your money likely could be better well spent. I mean c’mon, we all know what we use it for! For around $150 you can find a lot of quality toilets.
If you find yourself standing in Home Depot scratching your head feel free to call Family Plumbing and Heating with any questions. We love talking about this stuff!
Recently Family Plumbing and Heating replaced a boiler for a home in South Regina. We were originally called on site for a no heat but after diagnosis, the conclusion was that replacement parts were going to be hard to source (if they were still even made) and the client’s money would be better spent on a new system. (The existing system was almost old enough to collect a pension!)
Working tirelessly, we were able to bring this 1960’s system up to 2018 standards over the course of three days. Luckily we have been experiencing a fairly warm winter and Family Plumbing and Heating also provides portable heaters for our clients’ if they need to be without heat overnight. Now in the previous example when there is no other choice, replacements need to go in ASAP. But if possible, the best time to replace a boiler is in warm whether while it’s still operational.
But why would I replace it when it still works? You’re going to have to hear me out on this one. Boiler replacements are not as straight forward as other heating systems. 9 times out of 10 furnace replacements are easily done in a day, while updating boilers systems can sometimes feel like you are starting from scratch. With all the work involved, the last thing you want as a technician is to feel rushed during an extensive install. And for the financial investment a homeowner is going to make would they want the technician to rush either? Doubtful.
This is why, if possible, homeowners should try and look ahead and plan for replacement before total failure and plan for a summer installation when turning the heat off is not a concern. Allow the technicians as much time as needed to ensure your installation receives the quality workmanship it deserves.
For any homeowners interested in the expected remaining life expectancy of their current heating system, Family Plumbing and Heating offers full system maintenances and free estimates on replacement systems.